Name: | NP-1806 online pH/ORP controller |
---|---|
Measuring range: | -2.00~16.00pH, 0~99.9℃,-1999~+1999mV |
Resolution: | 0.01pH, 0.1℃, 1mV |
Accuracy: | ±0.0pH, ±0.3℃, ±1mV |
Temperature compensation: | -10~130℃ (auto and manual) |
Output: | 4~20mA |
Communication interface: | RS-485(optional) |
Power supply: | AC220V±10% 50/60Hz |
1. Measurement range: -2.00~16.00pH -1999~+1999mV -10~130℃
2. Resolution: 0.01pH 1mV 0.1℃
3. Accuracy: ±0.02pH ±1mV ±0.1℃.
4. Automatic temperature compensation: 0~100℃ PT1000
5. Stability: ≤0.01pH/24h
6. Signal output: isolated 4~20mA
7. Communication interface: RS485 MODBUS
8. Control interface: two groups ON/OFF relay contact, high/low level alarm control
relay delay set, relay load 3A 220VAC
9. Work conditions: ambient temperature of 0~60℃, relative humidity 90%RH
10. Working voltage: 220VAC ± 10% 50/60Hz
11. Protection: IP65
12. Dimensions: 96x96x168 mm
13. Hole size: 92x92mm
14. Weight: 0.9Kg
High accuracy, high stability, high anti-interference function
Automatic temperature compensation
Automatic recognition of standard solutions
Optional: RS-485 communication interface (MODBUS Protocol).
Watch-dog function: ensure that instrument did not panic.
Measuring results record
NP-1806 pH/ORP meter use latest generation of microprocessor-based instrument, a high intelligent, multi-function, high measurement performance, environmental adaptability and other characteristics. It is a highly intelligent online continuous monitoring instrument, integrate with the sensor and the second meter. Can be equipped with three composite or two composite electrodes to meet a variety of sites. Can be widely used for continuous monitoring of PH value for thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and water and other solution.
Sewage treatment
Aquaculture
Circulating water treatment
Dosing control
Biopharmaceutical
Fermentation
Chemical Industry
Power plant
Influent water treatment
Pretreat influent water before it enters your plant’s system. Proper influent water monitoring is the first defense to protecting the health of your equipment and preventing corrosion. By properly treating water at this stage, you can reduce costs and treatment within the power and steam generating process.
Steam and power generation
Protect your equipment – from pipes and tubes, to turbines and boilers – by ensuring your water is of the highest quality. Minimize silica levels to prevent turbine blade erosion, and monitor and manage dissolved oxygen (DO) to prevent corrosion.
Cooling water
Ensure heat transfer processes are as efficient as possible by effectively controlling total suspended solids (TSS) to avoid the expense and downtime associated with fouling and mineral buildup that can cause scaling and hazardous operating conditions.
Industrial wastewater
Ensure compliance with all discharge requirements. Our industrial wastewater solutions help you minimize environmental impact and ensure compliance with permits.